Summary. TE Connectivity identifies 929504-7 as an active 22-position housing for female terminals in the Junior Power Timer family. Its public record lists a 5 mm centerline, two rows, wire-to-board or wire-to-wire use, free-hanging mounting, black PBT housing, polarization and a non-sealable configuration. This guide turns those manufacturer facts into an interface-verification workflow. It does not approve contacts, wire, tools, a mating part, an application, a substitute, stock, price or production release.
Freeze the complete orderable identity
Begin with the EPPTC 929504-7 product record and preserve every digit and hyphen in the BOM, enquiry, drawing register and inspection plan. The TE Connectivity 929504-7 product page is the first-party identity anchor. Record its access date together with the current drawing and catalogue revisions. Do not shorten the item to “929504” or “Junior Power Timer housing,” because a family document can cover several position counts and configurations that remain separate orderable records.
Separate catalogue facts from project requirements
The TE page describes a 22-position, two-row housing for female terminals, with a 5 mm centerline, black PBT body, 180-degree cable exit and integrated primary locking. These fields are useful for identity and receiving plans, but they do not form a complete harness specification. A maximum rating, temperature range or dimensional value must be read with its scope and test conditions. The project must separately define the exact circuit load, wire construction, environment, inspection method and applicable acceptance criteria.
Review the interface drawing before mating selection
The official TE customer drawing 929504 controls the housing-family geometry. Review the current revision for cavity layout, datums, polarization, latch features, dimensions and referenced components, then locate the view or table that applies to suffix -7. A similar shape, matching position count or family label does not prove mating. Record the proposed counterpart by its full manufacturer number and verify both sides in controlled interface information.
Keep contacts, wire and tooling as separate records
The TE Timer Interconnection System catalogue helps organize the family search, but the housing alone cannot select a production terminal or tool. For every circuit, record the exact contact number, finish, conductor size, insulation range, strip length and intended production method. Bind crimp-height targets, pull-test criteria and applicator settings to the applicable contact and tooling documents. If a required document is absent, mark the choice as open rather than converting experience into an unsupported specification.
Use a controlled assembly and receiving checklist
- Record 929504-7 and the reviewed TE product page, drawing and catalogue revisions.
- Identify the proposed mate, every contact and every accessory by complete manufacturer number.
- Verify cavity assignment, terminal orientation, polarization and primary-lock inspection.
- Bind wire, strip length, crimp tool and acceptance criteria to current controlled documents.
- Keep quantity, price, stock and lead time in the current commercial record, not the technical specification.
- Route substitutions through a separate comparison and approval process.
Use related pages as navigation, not compatibility proof
Browse the TE Connectivity brand page, connector housing category, Junior Power Timer series page and automotive application page to locate separate catalogue records. Shared brand, category, series or application labels do not establish fit, interchangeability or project suitability. For a document-led enquiry, contact Lianxinlian Electronics with the proposed mate, contacts, wire and source revisions.
FAQ
Does 929504-7 include the contacts?
No. Treat the housing and each proposed contact as separate controlled orderable records unless the exact manufacturer sales record states otherwise.
Does a 22-position Junior Power Timer item automatically mate?
No. Position count and family name are discovery attributes. Verify polarization, latch geometry, interface dimensions and exact orderable records.
Does active status mean stock is available?
No. Lifecycle status and commercial availability are different. Reconfirm quantity, price and lead time at the transaction date.
Conclusion
Reliable use of TE Connectivity 929504-7 starts with exact identity and current first-party documents, then traces every mating, contact, wire and tooling decision to a controlled source. That evidence chain prevents a family association or similar appearance from becoming an unsupported assembly instruction.
Manufacturer Sources
- TE Connectivity official 929504-7 product page
- TE customer drawing 929504
- TE Timer Interconnection System catalogue
Use current part-specific drawings, contact documents and tooling instructions before procurement, assembly or production release.
Author: Lianxinlian Electronics Product Information Team. Technical data quality review: Lianxinlian Electronics Technical Data Quality Team performs an automated source, language and internal-link completeness check; it is not an engineering approval or a product-suitability decision.