Summary. A practical evidence checklist for selecting and assembling the TE Connectivity DEUTSCH DT06-2S two-position sealed wire-to-wire housing; exact-part manufacturer documents anchor the review, while contacts, seals, tooling and suitability remain project decisions.
Freeze the exact housing identity
The EPPTC DT06-2S product record points to a TE Connectivity / DEUTSCH automotive connector housing. The TE Connectivity exact-part page for DT06-2S describes an active, gray, two-position housing for female terminals in the DEUTSCH DT wire-to-wire family. These facts identify the housing; they do not define a complete terminated harness. Keep the unshortened orderable number in the BOM, enquiry, drawing index and receiving record.
Treat suffixes and variants as separate orderable identities. The official page groups drawings and related family material, but a drawing covering several DT06-2S variants still needs its applicability checked against the purchased configuration. Store the URL, document title and revision beside the part number. Record which team member owns unresolved questions about mating, contact size, cavity plugs or packaging. A search result or attractive product photograph is only a discovery aid until its part scope is established.
Separate housing data from assembly performance
TE lists two positions, a sealable construction, a housing for female terminals and a wire-to-wire connector system. It also presents a 5.46 mm centerline and an operating-temperature range of -55 to 125 °C on the exact-part page. Capture such values with their source and conditions rather than silently applying them to an entire cable assembly. The product page describes the housing; its table alone cannot validate every contact, seal, wire, crimp, mate and environmental interface in a proposed build.
Make a requirements matrix with columns for the requested application condition, the manufacturer source, the selected component and the project verification. Include temperature, electrical load, expected exposure, cable exit, mounting space and service access where relevant. Leave a blank or flagged item when a condition cannot be connected to the exact part and applicable drawing. A catalogue rating is an input to design review, not proof that the customer harness meets a system-level requirement.
Control the sealing and termination stack
A sealable housing is not a ready-made sealed connection. Before assigning an environmental claim, identify the intended contact, wire insulation range, cavity sealing approach, interface mate and any required accessory from current manufacturer documents. Check whether every populated and unused cavity has a documented treatment. Compare the selected wire insulation outside diameter with the applicable seal instructions, and keep the actual configuration in a controlled assembly record. Do not infer a component match from color or visual similarity.
The TE page provides drawing and application-specification entries that can anchor this review. Obtain the applicable revision, then record the crimp tool and inspection criteria selected for the contact actually used. Verify insertion, retention and any position-assurance feature under that assembly instruction. A sample that appears to latch is useful observation, not a substitute for defined pull, electrical or sealing evidence. Keep observations, limits and release decisions as distinct fields.
Create a receiving and change-control checklist
Receiving should compare the physical label with the full DT06-2S identity, purchase line and approved configuration. Record quantities and lot or packaging information when provided, visible damage, revision or supplier-document changes and how uncertain material is segregated. Avoid replacing an acceptance drawing with a reseller image. Current stock, price and lead time should be confirmed in the live commercial response; neither a published catalogue page nor this article guarantees availability.
For a proposed alternate, open a separate change record. Compare complete orderable identity, keying, mechanical envelope, cavity count, contact and seal system, mating component, document revisions and installation process. A shared DEUTSCH DT family name does not establish drop-in compatibility. Assign owners to unresolved differences and retain the original requirement beside the candidate evidence. Purchasing should not overwrite the released BOM merely because a substitute is described as equivalent.
FAQ: three common selection shortcuts
Does “sealable” mean that an assembled harness will meet a stated IP rating? No. The interface and installed components must be evaluated under the applicable manufacturer conditions and the project test plan. Can a same-looking two-way DT housing be used without a new comparison? No. Keying, suffixes and accessory scope must be checked. Does the TE product page approve a specific wire, contact or crimp tool for this build? It supplies document entry points; the exact combination and current assembly instructions still need to be verified.
What should be sent with an enquiry? Include the complete DT06-2S number, intended mating part, contact and wire information if known, operating environment, estimated volume and the drawing revisions already reviewed. Mark unknown items explicitly. That makes the response auditable and avoids an implied compatibility decision based on an incomplete request.
Conclusion and related navigation
A useful DT06-2S decision file makes the boundary between published housing data and project evidence visible. Start with the exact TE part record, connect each selected contact and seal to its own current source, document the assembly process and reserve final suitability decisions for the responsible project review. Reopen the file whenever a suffix, drawing, accessory or environment changes.
Explore the TE Connectivity brand catalogue, connector housing category, wire-to-wire application directory and automotive application directory for related published records. Those directories aid discovery and do not certify a mating or substitute relationship. Contact Lianxinlian Electronics with the full part number and open document questions for a traceable enquiry.
Manufacturer sources
Author: Lianxinlian Electronics Product Information Team. Technical data quality review: Lianxinlian Electronics Technical Data Quality Team performs automated checks of source, language and internal-link completeness. This is not human engineering approval or approval of product suitability.