Summary. TE Connectivity identifies 1-1827864-6 as an active Dynamic 1000 Series receptacle housing with 12 positions, two rows, 2.5 mm centerline, crimp termination, wire-to-board system, free-hanging mounting and black housing colour. This guide turns those manufacturer facts into a document-controlled crimp and assembly workflow. It does not approve a terminal, wire, tool, mating header, electrical load, replacement, application, price, inventory or production release.
Freeze the complete orderable identity
Start with the EPPTC 1-1827864-6 product record and retain every prefix, hyphen and suffix in the BOM, drawing register, quotation and inspection plan. The TE Connectivity 1-1827864-6 product page is the first-party identity anchor. Record the page URL, access date and current document revisions. Do not shorten the item to “1827864” or “Dynamic 1000 housing,” because a family drawing can cover multiple position counts and configurations that remain separate orderable records.
Separate catalogue facts from project limits
TE lists this record as a 12-position receptacle housing in a signal, wire-to-board system, with a 2.5 mm centerline and two rows. Those are useful catalogue facts, but they are not a complete cable-assembly specification. Current rating, wire range, temperature limits, material declarations and test conditions must be read in the exact documents applicable to the selected contacts and project. Never transfer a headline value from a related family item into a release note without checking its scope.
Read the customer drawing before mating review
The official TE customer drawing 1827864 controls the housing-family geometry. Review the current revision for cavity layout, datum structure, latch features, polarization, dimensions and referenced components, then locate the view or table that applies to 1-1827864-6. A catalogue thumbnail, a sample that looks similar or a matching position count cannot prove mating. The proposed header or counterpart needs its own complete manufacturer number and interface evidence.
Build the crimp record around exact contacts
The housing does not, by itself, select a production contact or crimp tool. The TE Dynamic D-1000 Series catalogue helps organize the search, while the product page exposes application and product specifications as separate controlled files. For every intended circuit, record the exact contact number, plating, wire construction, conductor area, insulation range, strip length, applicator or hand tool, and the governing crimp specification. Treat each choice as an evidence item rather than a family-level assumption.
Control assembly and inspection steps
A release packet should describe terminal orientation, insertion direction, cavity assignment, audible or tactile locking checks, retention verification and any secondary component that the exact design requires. It should also distinguish setup samples from production acceptance. Cross-section measurements, crimp-height targets and pull-test criteria must come from the applicable contact and tooling documents, not from this article. When a requirement is absent or ambiguous, record it as open rather than converting experience into an undocumented specification.
Use a handoff checklist
- Record 1-1827864-6 and the reviewed TE page, drawing and catalogue revisions.
- Identify the proposed mating item, every contact and every accessory by complete manufacturer number.
- Bind wire construction, strip length, crimp tool and inspection criteria to their controlled documents.
- Define cavity assignment, terminal orientation, lock checks and traceable sample records.
- Keep commercial quantity, price and lead time in the current quotation, outside the technical specification.
- Route substitutions through a separate comparison and approval process.
Use site navigation without implying compatibility
Browse the TE Connectivity brand page, connector housing category and Dynamic 1000 Series page to discover separate catalogue records. These dimensions help navigation only. Shared brand, category or series labels do not establish fit, interchangeability, tooling equivalence or project suitability. For a document-led enquiry, contact Lianxinlian Electronics with the proposed contacts, mate, wire and source revisions.
FAQ
Does the housing include the contacts?
No. Treat the housing, contacts, mate and tooling as separate controlled items unless the manufacturer's exact sales record says otherwise.
Can the 12-position layout prove that another connector mates?
No. Position count is only one attribute; verify polarization, latch geometry, interface dimensions and the exact orderable records.
Does an active manufacturer status mean stock is available?
No. Lifecycle status and commercial availability are different. Reconfirm quantity, price and lead time at the transaction date.
Conclusion
Reliable use of TE Connectivity 1-1827864-6 begins with exact identity and current first-party documents, then traces each contact, wire, tool and mating decision to a controlled source. That evidence chain prevents a family association or similar appearance from becoming an unsupported production instruction.
Manufacturer Sources
- TE Connectivity official 1-1827864-6 product page
- TE customer drawing 1827864
- TE Dynamic D-1000 Series catalogue
Use the current part-specific drawing, application specification and tooling documents before procurement, crimp setup or production release.
Author: Lianxinlian Electronics Product Information Team. Technical data quality review: Lianxinlian Electronics Technical Data Quality Team performs an automated source, language and internal-link completeness check; it is not an engineering approval or a product-suitability decision.